Descargar Imprimir esta página

Pleasant Hearth BAYSIDE 235-61-351 Manual Del Usuario página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

CARE AND CLEANING
The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life and require no
further lubrication. However, periodic cleaning/vacuuming of the fan/heating unit is recommended. Make sure the unit is
turned OFF and unplugged whenever you are cleaning the heater of the fireplace.
WARNING
Make sure the power is turned off before proceeding. Any electrical repairs or rewiring of this unit should be carried out
by a licensed electrician in accordance with national and local codes. If repairing or replacing any electrical component or
wiring, the original wire routing, color coding and securing locations must be followed.
WARNING
Electric outlet wiring must comply with local building codes and other applicable regulations to reduce the risk of fire,
electric shock and injury to persons
WARNING
Do not use this fireplace if any part of it has been under water. Immediately call a qualified service technician to inspect
the fireplace and replace any part of the electrical system.
WARNING
Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electrical shock, or personal
injury.
WARNING
During any service of this appliance, the power to the unit must be turned off. Always remember to remove the electrical
plug from the wall outlet.
Clean the metal trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth. DO
NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based products can
be obtained at supermarkets or hardware stores.
15

Publicidad

loading