Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Charging the battery
The battery must be charged before first use, whenever the vacuum will not turn on because
the battery is too low or whenever the low battery LED indicators start to flash.
NOTE: When the power is too low and the battery needs to be charged, the vacuum
will automatically turn off.
Insert the charger plug into the battery charging port. The battery can be charged
either fixed to or separated from the vacuum cleaner.
Insert the plug into the mains socket.
•
There are 5 battery LED indicators. The indicators will simultaneously flash when the
battery level is low and will consecutively flash when the vacuum cleaner is charging.
Once the vacuum cleaner is fully charged, the indicators will remain steadily lit for 5
minutes before turning off when the unit enters standby mode.
•
The indicators indicate the battery level: 5 steady lights = the battery is full; 1 steady light
= the battery level is low.
•
It takes around 5 hours to fully charge the battery.
•
Once charged, the battery can be used for 10 minutes at high power and 30 minutes at
low power.
WARNING!
•
Do not use the unit while it is charging.
•
After charging, always unplug the charger from the battery and mains socket.
•
Do not charge the battery at temperatures below 0°C or above 50°C.
CAUTION
•
Only use the removable power supply provided with this unit to recharge the
battery: ZD012A300040EU.
Removing/replacing the battery
Please replace the battery whenever the performance drops or it becomes damaged in any way.
WARNING! Always unplug the charger from the mains socket before removing
the battery.
18
EN
Publicidad
