Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Cleaning and maintenance
WARNING!
• Always turn off and unplug the unit from the power
supply before cleaning.
• Never immerse the unit in water or any other liquid.
• Detach all accessories from the main unit.
• Clean the unit with a soft, slightly damp cloth. Make sure that
no liquid enters the unit.
• When cleaning the unit, never use abrasive products, metal
brushes, scourers, wire sponges or sharp utensils.
• After cleaning, dry the unit thoroughly.
Cleaning the dust cup and filters
Clean the dust cup after each use or when it is full and has reached the MAX mark. Clean
the filters and central part of the filter whenever they are full, there is a loss of suction or
on a quarterly basis.
Detach the base of the dust cup to empty the contents.
Turn the dust cup anticlockwise and remove it.
Unscrew the lower part of the filter system and remove it. Wipe the dust cup, the
cover and the central part of the filter with a dry cloth.
Remove the foam filter located in the central part of the filter.
Press the HEPA filter release button and remove the HEPA filter cover. The filter is found
on the underside of this cover.
Clean the filters with water and leave them to thoroughly dry naturally before using
them again.
WARNING! To prevent damage to the unit, only use dry, intact filters!
•
Reassemble all the parts in reverse order.
21
EN
Publicidad
