Publicidad
Idiomas disponibles
Idiomas disponibles
replaceable. When it is worn out, the entire
light must be replaced.
EXPLOSION HAZARD! Incorrect
„
handling of the integrated
rechargeable battery in the
magnetic lamp can potentially cause an
explosion or a fire.
If rechargeable batteries are used
„
incorrectly, there is a risk of explosion or of
skin burns from escaping battery fluid.
Never throw rechargeable batteries on a
„
fire. They may explode or cause toxic
fumes.
Do not take rechargeable batteries apart or
„
short-circuit them.
Charge the battery at normal room
„
temperature (approx. 20 °C).
Use only an SELV mains adaptor for
„
charging.
z Risk of leakage from
rechargeable batteries
Avoid exposing rechargeable batteries to
„
extreme conditions and temperatures, e.g.
radiators or direct sunlight.
Avoid contact with skin, eyes and mucous
„
membranes! In the event of skin contact
with battery acid, rinse the affected area
immediately with plenty of clean water and
seek medical advice immediately!
WEAR PROTECTIVE GLOVES!
„
Leaking or damaged rechargeable
batteries can cause chemical burns
if they come into contact with skin.
Therefore, wear suitable protective gloves in
such cases.
In the event that of battery leaks, remove
„
battery from the product immediately to
avoid damage.
z Before first-time use
Check that all package contents are present.
Inspect the cordless magnetic lamp
the USB charging cable
and
1
for any signs of
11
external damage. If you find any signs of
damage, do not use the cordless magnetic
lamp. Please contact Customer Service at the
address indicated.
Unpack all parts of the product. Remove the
packaging material. Keep the packaging in
a safe place out of the reach of children.
There is a risk of suffocation if children are
allowed to play with packaging material.
z Assembly and installation
Using the magnetic holder
Please note: dispose of all packaging
material.
Take the magnetic holder with the adhesive
pad
and pull off the protective strip (see
7
Fig. B). Now stick the magnetic holder in the
desired position. To ensure good adhesion,
make sure the surface is flat, dry and free of
grease. Fix the cordless magnetic lamp
the magnetic holder
integrated magnet
9
C).
Using the suction pads
Please note: first check the nature of the
surface to make sure it is capable of
providing a secure fixing for the suction pads
with hooks
on the wall or furniture item.
8
The surface must be flat and clean.
Hook the suction pad hooks
locating eyes
on the back of the cordless
10
magnetic lamp (see Fig. E). Make sure the
lamp is firmly attached. Only attach the
suction pads to a flat, clean surface, e.g. a
mirror. Check from time to time that the
cordless magnetic lamp is still firmly
attached.
Please note: removing the adhesive pad
may cause damage to the surface in some
cases. We can accept no liability for such
damage. When the battery needs to be
recharged, the magnetic lamp can simply be
removed from the suction pad hooks
1
with the aid of the
7
in the casing (see Fig.
into the two
8
or
8
GB/IE/NI/CY/MT
to
43
Publicidad
