Publicidad
Idiomas disponibles
Idiomas disponibles
outlet socket.
The charging time is approx. 2-3 hours. The
charge indicator
5
cordless magnetic lamp is fully charged. As
soon as the cordless magnetic lamp
fully charged, the charge indicator
green. You can then unplug the USB mains
adaptor from the power outlet socket and
disconnect the USB charging cable
the cordless magnetic lamp
z Switching the cordless
magnetic lamps ON/OFF/
Setting timer function
The cordless magnetic lamps have three
functions: Permanently on, 3-minute timer
and 15-minute timer.
For the permanently on function, set the
„ „
OFF/15M/3M/ON switch
position and press the ON/OFF switch
Maximum illumination time when fully
charged: approx. 3 hours.
For the 3-minute timer function, set the
„ „
OFF/15M/3M/ON switch
position 3M and press the ON/OFF switch
. The cordless magnetic lamps will then
2
switch off automatically after 3 minutes.
For the 15-minute timer function, set the
„ „
OFF/15M/3M/ON switch
position 15M and press the ON/OFF
switch
. The cordless magnetic lamps will
2
then switch off automatically after 15
minutes.
To completely switch off the cordless
„ „
magnetic lamps, set the OFF/15M/3M/
ON switch
to the OFF position.
4
z Cleaning and storage
RISK OF ELECTRIC SHOCK!
There is a risk of electric shock from
parts that carry electric current.
Unplug the USB mains adapter from the
power outlet socket before attempting to
clean the lamp.
remains red until the
is
1
shows
5
from
9
�
1
to the ON
4
to the
4
to the
4
RISK OF DAMAGE!
Cleaning the cordless magnetic
lamps and accessories incorrectly
could damage them.
Before cleaning the cordless magnetic
„ „
lamp, always switch it off and remove the
USB charging cable.
Do not use corrosive cleaning agents,
„ „
brushes with metal or nylon bristles or not
sharp or metallic cleaning implements such
as knives, hard spatulas or similar items.
They may damage the surfaces.
Never clean the cordless magnetic lamps
„ „
or accessories under running water.
Wipe down the cordless magnetic lamps
„ „
and accessories with a slightly moistened
cloth.
Wipe the cordless magnetic lamps and
„ „
accessories completely dry.
When the cordless magnetic lamp is not in
„ „
�
use, store it in a dry place and make sure it
2
is switched off.
z Troubleshooting
= Fault
= Cause
= Solution
= The lamp does not light up.
= The battery needs charging.
= Charge the cordless magnetic lamps
via the micro-USB socket using the
USB charging cable supplied. The
charging time is approx. 2-3 hours.
= The charge indicator does not light
up when the lamp is being charged.
= There is no power supply to the
cordless magnetic lamps.
= Please check whether your mains
adaptor and the USB charging cable
are properly connected.
GB/IE/NI/CY/MT
43
Publicidad
