LIVARNO home 1061-G Instrucciones De Uso Y De Seguridad página 33

z Assembly and installation
Please note: Take the product out of its
packaging and remove all packing material.
Check that all package contents are
„
present.
Check if the product or individual parts are
„
damaged. If that is the case, do not use the
product. Contact the distributor via the
service address given in the warranty
section.
RISK OF INJURY! Improper
handling of the product may result
in damage to the product.
Use a base with a minimum weight of
„
50 kg.
Do not place the product on sandy or soft
„
ground or on loose soil.
Place the product in a suitable base (not
„
included in delivery) and position in the
desired spot.
Always make sure that the lower part of the
„ „
(base) pole is inserted at least 40 cm
3
deep into the base.
Insert the (base) pole
„ „
fasten, following the instructions provided
by the manufacturer of the base.
Make sure the product is firmly fixed in
„ „
place.
Position the parasol
„ „
pole (see Fig. A). Let the (top) pole
3
glide over the (base) pole
Make sure that the snap stud
„ „
with the hole (see Fig. A).
5
RISK OF TRAPPING/PINCHING!
Take care not to get your hand
trapped.
For easy assembly, press down on the snap
„ „
stud while letting the (top) pole
4
over the (base) pole
Make sure the snap stud
„ „
the hole �
5
For easy disassembly, press down on the
„ „
snap stud while lifting the (top) pole
4
until you can remove the pole.
into the base and
3
above the (base)
1
2
(see Fig. A).
3
is aligned
4
glide
2
(see Fig. A).
3
fits exactly into
4
2
z Opening/closing the
parasol
To open the parasol, push the handle
„ „
upwards until the parasol has fully opened
(See Fig. B).
To close the parasol, pull down the handle
„ „
until the parasol has fully closed.
6
z Cleaning and storage
Do not use corrosive cleaning agents,
„
brushes with metal or nylon bristles or sharp
or metallic cleaning implements such as
knives, hard spatulas or the like. These may
damage surfaces.
The canopy fabric is not washable.
„ „
Use only a dry, lint-free cloth for cleaning. If
„ „
the product is very dirty, dampen the cloth
slightly.
All parts must be completely dry before
„ „
storage.
In winter, store the product in a cool, dry
„ „
place. Avoid storing the product in a
heated room.
z Disposal
Note the labels on the packaging
materials when sorting the waste;
they are marked with abbreviations
(a) and numbers (b) with the
following meanings:
1-7: Plastics
20-22: Paper and cardboard
80-98: Composite materials
You can find out how to dispose of
the used product by contacting your
local district or city council.
The product and packaging
materials are recyclable. Please
dispose of them separately for
better treatment of waste.The Triman
logo is only applicable to France.
6
GB/IE/NI/CY/MT
33