Muskoka MTVS2353SOK Instrucciones De Montaje página 6

9. Line up the wood dowels in the bottom of panels F & K with the
holes in the base C. Also line up the cam lock dowels in the base
C with the holes in the bottom of panels F & K. Push the assembly
of panels F & K down until flush with the base C. Once flush, insert
cam locks at the bottom of panels F & K making sure the arrows on
the cam locks are facing down toward the base C. Turn the cam
locks to tighten. Do not strip the cam locks by over tightening.
Repeat the process for panels G & L.
10. Line up the wood dowels in the top edge of panels F, K, G, & L
with the holes on the bottom of shelf B and the cam lock dowels
in the bottom of shelf B with the holes on the top edge of panels F,
K, G, & L. Push the shelf B down on the mantle assembly until flush.
Insert cam locks into the holes on panels F, K, G, & L. Make sure
the arrows on the cam locks are facing up toward shelf B. Turn the
cam locks to tighten. Do not strip the cam locks by over tightening.
6
F
K
C
Hardware Used
a Cam Lock
B
C
F
K
Hardware Used
a Cam Lock
G
L
x 6
G
L
x 6