Publicidad
Idiomas disponibles
Idiomas disponibles
13. Locate panels M, N & O. Insert 8 wood dowels into the edge of
each panel.
14. Place panel M, making sure the finished side is facing out, into the
firebox opening and up against panel J on shelf B. Make sure the
wood dowels in panel M line up with the holes in panel J and the
cam lock dowels in panel J line up with the holes in panel M. Once
panel M is flush with panel J insert 3 cam locks on the back side
of panel M making sure the arrows on the cam locks are facing up
toward the shelf B. Turn the cam locks to tighten. Do not strip the
cam locks by over tightening.
15. Place panel N, making sure the finished side is facing out, into
the firebox opening and up against panel K. Make sure the wood
dowels in panel N line up with the holes in panel K and the cam
locks dowels in panel K line up with the holes in panel N. Once
panel N is flush with panel K insert 2 cam locks on the back side
of panel N making sure the arrows on the cam locks are facing
toward panel K. Turn the cam locks to tighten. Do not strip the cam
locks by over tightening.
Repeat process for panels O & L.
8
M
O
Hardware Used
c
wood Dowel
B
M
Hardware Used
a
Cam Lock
N
K
Hardware Used
a
Cam Lock
N
x 8
x 3
L
O
x 4
Publicidad
