Publicidad
Idiomas disponibles
Idiomas disponibles
16. Locate back panel P. Making sure the finished side is facing in
toward the mantel, line up the holes in panel P with the holes on
the back of the mantel. Secure panel P to the mantel using 16 small
screws (e). Tighten until secure.
17. installing your electric firebox
Refer to the manual included in your electric firebox carton. It will provide
you with the step by step instructions to prepare the electric firebox,
maintenance instructions and the firebox functions prior to installation
in the media console.
The firebox comes with 3 metal brackets and 11 black screws (10
required plus 1 spare). These metal brackets must be attached to all 3
sides of the firebox and 2 sides of the mantel to ensure that your firebox
does not move around as you use it.
Insert your firebox from the rear of the mantel and position between the
two opening trims.
The top trim does not attach to the mantel, just the firebox. If you have any
questions about the firebox please reference the installation instructions
that come with the firebox.
A
P
E
Hardware Used
e
Small Screw
U
T
Q
Hardware Used
U
Firebox Trim Screw
x 17
x 10
9
Publicidad
