Onkyo TX-NR474 Manual De Instrucciones página 54

> Before Start > Part Names
GAME "VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the
GAME input selector. (Default Value is "VIDEO 1")
STRM BOX "VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the
STRM BOX input selector. (Default Value is "---")
PC "VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the
PC input selector. (Default Value is "---")
CD "VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the
CD input selector. (Default Value is "---")
TV "VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the
TV input selector. (Default Value is "---")
∫ 4. Digital Audio Input
You can change input assignment between the input selectors and DIGITAL IN COAXIAL/
OPTICAL jacks. If you do not assign a jack, select "---".
BD/DVD "COAXIAL", "OPTICAL 1", "OPTICAL 2": Assign a desired
DIGITAL IN jack to the BD/DVD input selector. (Default Value is
"---")
CBL/SAT "COAXIAL", "OPTICAL 1", "OPTICAL 2": Assign a desired
DIGITAL IN jack to the CBL/SAT input selector. (Default Value is
"COAXIAL")
GAME "COAXIAL", "OPTICAL 1", "OPTICAL 2": Assign a desired
DIGITAL IN jack to the GAME input selector. (Default Value is "--
-")
STRM BOX "COAXIAL", "OPTICAL 1", "OPTICAL 2": Assign a desired
DIGITAL IN jack to the STRM BOX input selector. (Default Value
is "---")
PC "COAXIAL", "OPTICAL 1", "OPTICAL 2": Assign a desired
DIGITAL IN jack to the PC input selector. (Default Value is "---")
CD "COAXIAL", "OPTICAL 1", "OPTICAL 2": Assign a desired
DIGITAL IN jack to the CD input selector. (Default Value is
"OPTICAL 1")
54
> Install > Initial Setup > Playback
Advanced Setup
TV "COAXIAL", "OPTICAL 1", "OPTICAL 2": Assign a desired
DIGITAL IN jack to the TV input selector. (Default Value is
"OPTICAL 2")
0 Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32 kHz,
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/16 bit, 20 bit, 24 bit.
∫ 5. Analog Audio Input
You can change input assignment between the input selectors and AUDIO IN jacks. If you
do not assign a jack, select "---".
BD/DVD "AUDIO 1", "AUDIO 2", "AUDIO 3": Assign a desired AUDIO IN
jack to the BD/DVD input selector. (Default Value is "---")
CBL/SAT "AUDIO 1", "AUDIO 2", "AUDIO 3": Assign a desired AUDIO IN
jack to the CBL/SAT input selector. (Default Value is "---")
GAME "AUDIO 1", "AUDIO 2", "AUDIO 3": Assign a desired AUDIO IN
jack to the GAME input selector. (Default Value is "AUDIO 1")
STRM BOX "AUDIO 1", "AUDIO 2", "AUDIO 3": Assign a desired AUDIO IN
jack to the STRM BOX input selector. (Default Value is "---")
PC "AUDIO 1", "AUDIO 2", "AUDIO 3": Assign a desired AUDIO IN
jack to the PC input selector. (Default Value is "AUDIO 2")
CD "AUDIO 1", "AUDIO 2", "AUDIO 3": Assign a desired AUDIO IN
jack to the CD input selector. (Default Value is "AUDIO 3")
TV "AUDIO 1", "AUDIO 2", "AUDIO 3": Assign a desired AUDIO IN
jack to the TV input selector. (Default Value is "---")
2. Speaker
You can make changes to the connection environment of the speakers and change the
volume level. Settings are automatically configured if you use AccuEQ Room Calibration.
This setting cannot be selected if headphones are connected or if "5. Hardware" - "HDMI" -
"Audio TV Out" is set to "On" so audio is output from the speakers of the TV.
| Supplementary Information | Others