Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
6. Locate Hearth/Base (A) and set out f nished
side up on the f oor.
7. Insert one Wood Dowel (N) into each of the
pre-drilled holes.
8. Attach the Completed assembly from step 5
to the Hearth/Base (A). Make sure that
dowels are seated into the pre-drilled holes
in the Hearth/Base. Using Bolts (L) and
Washers (M) attach panels through
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
9. Insert one Wood Dowel (N) into each of
pre-drilled holes. Push the Right Side Panel
(F) and Left Side Panel (E) snug to
completed assembly from step 8. Using Bolts
(L) and Washers (M) through the
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
10. Insert one Wood Dowel (N) into each of the
pre-drilled holes.
11. Locate the Center Shelf (H), upper side
panels (I, J) on the top of the assembly from
the step 9, as shown in diagram. Make sure
that dowels are seated into the pre-drilled
holes. Using Bolts (L) and Washers (M)
attach these panels through pre-drilled holes
in the mounting blocks.
HAND TIGHTEN ONLY.
E-4
E-4
Right
Side
Panel
F
N
N
N
N
Right
L
Upper
M
Side
Panel
Center Shelf
J
N
N
N
N
N
N
L
M
N
N
N
A
Hearth/Base
Left
Upper
Side
Panel
N
H
N
N
M
L
Left
Side
Panel
E
L
M
N
I
N
N
N
Publicidad
Tabla de contenido
