Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
12. Insert one Wood Dowel (N) into each of the
pre-drilled holes on the top edges of the
Assembly from step 11. Then locate
Mantel/Top (G) and lay f nished side up on
top of completed assembly. From the inside,
attach Mantel/Top (G) using Bolt (L) and
Washer (M) through the pre-drilled holes in
the mounting blocks.
HAND TIGHTEN ONLY.
13. Using Phillips head screwdriver tighten all
Bolts alternating top and bottom, left and
right.
14. Locate Side Back Panel (R) and Center
Back Panel (K), attach to the back of the
completed assembly from step 13. Use a
Phillips Head screw driver, tighten screws
(Q1) through the pre-drilled holes in the
Back Panels to the completed assembly.
E-5
E-5
Mantel/Top
N
N
Q1
Q1
Center Back Panel
R
Side
Back
Panel
G
M
L
K
R
Side
Back
Panel
N
N
Publicidad
Tabla de contenido
