Installation; Lifting Instructions; Location - ESAB Warrior 500i CC/CV Manual De Instrucciones

US
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP 23 is designed for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
4

INSTALLATION

The installation must be done by a professional.
4.1

Lifting instructions

FASTEN THE EQUIPMENT
THE GROUND IS UNEVEN OR SLOPING.
If equipment is placed on a surface that slopes more
than 10°, toppling over may occur. Personal injury
and/or significant damage to equipment is possible.
4.2

Location

Position the welding power source such that its cooling air inlets and outlets are not
obstructed.
bu22a
–
PARTICULARLY IF
- 9 -
© ESAB AB 2013