Mounting Surface; Mounting Bracket - West Marine VHF550 Manual Del Usuario

Installing the Hardware
2. Position.the.radio.into.the.desired.location..Mark.the.edges.of.the.
bracket.on.the.mounting.surface.
Remove the mounting bracket drill template from the back of the
3.
manual, and use the template to mark the drill holes on the mounting
surface.
4. Drill.the.holes.for.the.mounting.bracket;.be.sure.to.follow.any.special.
requirements.of.the.mounting.surface.
Remove the bracket from the radio, and use the mounting hardware to
5.
secure.the.bracket.to.the.mounting.surface.
Hex nut
Spring washer
Washer
Hex bolt
6. Install.the.radio.back.into.the.mounting.bracket.
Mounting
surface
E-39
Mounting
bracket