Connecting To An External Speaker - West Marine VHF550 Manual Del Usuario

Installing the Hardware
6. Press the
returns to the Setup menu.

Connecting to an external speaker

You can use an external speaker to monitor the radio from a different part of
your boat or in a noisy environment. If you adjust the
radio, it will also adjust the external speaker volume.
The VHF550 supports an external speaker with the following specifications:
•
•
1. Disconnect the accessory cable from the accessory connection on
the radio.
2. Connect the BLACK wire of the accessory cable to the GROUND
WIRE of your external speaker.
3. Connect the ORANGE wire of the accessory cable to the POSITIVE
(+) WIRE of your external speaker.
4. Be certain all wire connections are secure and that all open wires are
adequately covered.
5. If you are finished connecting all external accessories, line up the
arrows on the side of the accessory cable and connector and connect
the accessory cable to the accessory connector on the back of the
VHF550.
NOTE: To extend the life of the radio, use waterproof tape to seal
electrical connections.
button. The radio activates the new time setting and
SELECT
Minimum impedance of 4 Ohms
Minimum power handling of 10 Watts
E-45
knob on the
VOL-PWR