Disposal Instructions - Reer Neo 200 Manual De Uso

Warranty
Please retain your receipt, the user manual and item number.
Warranty claims or claims from promises of guarantee must be processed by the dealer.
The technical specification, information and characteristics of the product described
herein have been compiled to the best of our knowledge and belief and are correct at
the time of printing. Any information provided by reer should be correct and authoritative.
Nevertheless, reer does not accept liability for potential errors in this document and
reserves the right to make changes to the product design and/or specifications without
prior notice. Reproduction and disclosure of information contained in this copyright-
protected document, in any form or by any means - graphical, electronic or mechanical by
photocopying, recording on tape or storage in a data retrieval system (even in part), require
prior written consent from reer.

Disposal instructions

At the end of its life, this product must not be disposed of as normal
domestic waste, but should be recycled at a collection point for electrical
appliances. Please see the relevant symbol on the product, in the user
manual and packaging. Materials can be recycled as specified. Do not put
used batteries into household waste. Instead they should be disposed of as
hazardous waste or with a battery collection station provided by the dealer. An important
contribution to the protection of the environment can be made by reusing the unit,
recycling its components or otherwise reusing old appliances. Please contact your local
council to find out more about an appropriate disposal centre.
18
The status LED does not light up
Make sure that both units are switched on.

Check the connection of the mains adapter to the wall power socket and the unit.

Exchange the batteries and/or check the polarity.

Check the channel setting (A or B) of the transmitter and receiver.

The status LED flashes orange
The parent unit receives sounds. Turn up the volume on the parent unit to make sure

that you hear the sounds from your baby.
The status LED flashes red + alarm tone
The batteries are depleted. Replace the batteries or connect the unit to the power supply.

No sound transmission despite established connection
Check if the volume control button has been turned all the way down.

You can hear other wireless devices
As this baby monitor works with analogue radio technology, interference from other

wireless devices can occur. Change the channel.
A loud whistling tone sounds from the parent unit (feedback)
The baby unit is too close to the parent unit. Increase the distance between the baby

unit and the parent unit.
No connection between parent and baby unit / random noise / connection is lost
Make sure that both units are switched on.

Check the channel setting and/or change the channel.

The maximum range has been exceeded. Move the baby monitor to a different position

and/or reduce the distance between the baby and parent unit.
The baby/parent unit is close to interfering devices (e.g. microwave) or metal objects.

Try to find the source of interference and move the units to a different position.
The batteries are almost depleted. Replace the batteries or connect the units to the

power supply.
Troubleshooting
GB
19