hillvert HT-COSTIGAN-50X12S01 Manual De Instrucciones página 14

10. Lay the dripline on the ground, then connect the garden hose using the
plastic connector (3).
11. Hook the garden hose to the water source and open the water supply.
12. Check that drip irrigation occurs at the correct intervals, small water
particles should appear along the entire length of the drip line.
13. Make sure the drip line is properly spaced to irrigate the vegetation.
14. After unhooking the drip line from the water source, secure the connector
(3), with the cap (2).
3.4. Cleaning and maintenance
Disconnect the unit from the water supply before cleaning.
f)
g) Use only non-corrosive cleaning agents for cleaning the surfaces.
h) After each cleaning, all the parts should be dried well before the unit is used
again.
i) Store the unit in a dry and cool place protected from moisture and direct
sunlight.
j) Do not use sharp and/or metal objects (e.g. a wire brush or metal spatula) for
cleaning, as these may damage the surface of the material from which the unit
is made.
EN