cam PANORAMIC EVO Instrucciones De Uso página 20

INSTRUCTIONS FOR USE
8 ADULT THREE-POINT BELT 4- FIX.
•Put the child car seat on the vehicle seat in forward facing, adjust the seat body
to upright.
Aim the 2 FIX connectors to the ISOFIX anchorages on vehicle seat^ push to make
it connect^ till you hear "Click".
•Continue push the child ca r seat; make it close to the vehicle seat back.
•Check the FIX release button^ make sure the indicator turns to Green.
•After the child sit into the car seat, pull out the car belt let diagonal belt go
under the head rest, and lab belt go through belt guide slot on the base. Buckle
it. Then tighten and flatten the belt.
9 ADULT THREE-POINT BELT+FIX + TOP TETHER.
Put the child car seat on the vehicle seat in forward facing, adjust the seat body
to the upright position.
Aim the 2 FIX connectors to the ISOFIX anchorages on the vehicle seat, push to
make it connect, till you hear *Clic *.
• Continue push the child car seat, make it close to the vehicle's seat back.
• Check the FIX release button, make sure the indicator turns to green.
• After the child sit into the car seat, pull the car belt, let diagonal belt go under
the headrest, and abdominal belt go through belt guide slot on the base, buckle
it. Then tighten and flatten the belt. Hook the "Top tether" strap to the anchorage
point as shown with the spring hook. To tighten the top tether strap more easily
pull the top of the seat towards the vehicle seat.
IMPORTANT: the indicator changes to show green.
10 REMOVING THE CAR SEAT.
Removing the Top Tether.
Press the Top Tether pull-up strap unlock button and adjust the pull up strap to
a relaxed position. Remove the pull-up Strap Hook from the car's anchor point.
Removing the ISOFIX.
Also hold down the ISOFIX release button on either side of the seat. The ISOFIX
locking symbol is show in red to unlock the seat and remove the seat.
11.1 RE-FITTING THE 5-POINT HARNESS.
To reverse the above steps carefully to refit the 5-point harness. Ensure that all
the straps are not twisted and they were correctly mounted in the slots. If you are
in doubt, please contact the retailer or manufacturer for more information.
• Release the harness system: Press the harness adjuster lever, then pull
shoulder belt harness forward by another hand to lose it. Unfasten the metal
harness yoke from the back of child seat, then unfasten the connect of shoulder
straps.
• Pull the belt and shoulder straps out of the shoulder strap slots. Roll over the
base of child car seat, take off the "E" style buckle from the buckle strap. Take
off the belt , and keep them well , you may need them in the future.
11.2 REMOVING AND REFITTING THE SEAT COVERS.
Removing the seat covers.
• Adjust the headrest of the child seat to the highest position.
• Take the elastic seam of the cover from the backside of the headrest and
remove the cover of the headrest.
• Open the buttons around the seat shell.
19