AKASO EK7000 Manual Del Usuario página 13

EN
By default, your camera uses the entire image to determine the appropriate exposure
level. However, Exposure lets you select an area that you want the camera to prioritize
when determining exposure. This setting is particularly useful in shots where an
important region might otherwise be over-or underexposed. When you change this
setting, the LCD display immediately shows you the effect on your image. If you
change modes, the camera returns to using the entire scene to determine the correct
exposure level.
5. Photo Resolution
20MP / 16MP / 14MP / 12MP / 8MP / 5MP / 4MP (Default setting is 20MP)
6. Burst Photo
3 Photos
In Burst Photo mode, the camera captures up to 3 photos in 1 second, so it is
perfect for capturing fast-moving activities.
7. Self-timer
2s / 3s / 5s / 10s / 20s / 30s / 60s (Default setting is 5s)
A Self Timer gives a delay between pressing the shutter release and the shutter's firing.
It is most commonly used to let the photographer to take a selfie at specific intervals.
8. Time Lapse Photo
Off / On (Default setting is Off)
Time Lapse Photo captures a series of photos at specified intervals. Use this mode
to capture photos of any activity, then choose the best one later.
Note: When Time Lapse Photo is enabled, the camera will capture photos at specific
intervals that are applicable to Self-timer.
9. Power Frequency
50Hz / 60Hz / Auto (Default setting is 60Hz)
10. Microphone
Built-in / External (Default setting is Built-in)
You can choose between the internal and external microphones.
Note: The external microphone is not included. You need to purchase it separately.
11