EN
Remote
Photo button
Record button
Splashproof Only, Not Waterproof
Video
To record a video, make sure the camera is in Video mode.
To start recording:
Press the gray Video button. The camera beeps and the camera status light flashes
while recording.
To stop recording:
Press the gray Video button again. The camera beeps and the camera status light
stops flashing.
Photo
To capture a photo, verify the camera is in Photo mode.
To take a photo:
Press the red Photo button. The camera will emit a camera shutter sound and start
taking photos.
CR2032 Battery Replacement for Remote
1. Remove the 4 screws on the back cover of the remote with a 1.8mm Phillips
tip screwdriver.
19