Publicidad
Idiomas disponibles
Idiomas disponibles
5. Faults
5.
Faults
CAUTION!
Physical injuries and damage to property and the environment
EN
If faults cannot be eliminated by means of the listed measures, the instrument must be taken out of
operation immediately.
▶
Ensure that pressure or signal is no longer present and protect against accidental commissioning.
▶
Contact the manufacturer.
▶
If a return is needed, please follow the instructions given in chapter 7.2 "Return".
WARNING!
Physical injuries and damage to property and the environment caused by hazardous media
Upon contact with hazardous media (e.g. oxygen, acetylene, flammable or toxic substances), harmful media
(e.g. corrosive, toxic, carcinogenic, radioactive), and also with refrigeration plants and compressors, there is a
danger of physical injuries and damage to property and the environment.
Should a failure occur, aggressive media with extremely high temperature and under high pressure or
vacuum may be present at the instrument.
▶
For these media, in addition to all standard regulations, the appropriate existing codes or regulations
must also be followed.
▶
Use the requisite protective equipment.
For contact details, see chapter 1 "General information" or the back page of the operating instructions.
Fault
Connection to the IIoT
platform is not successful
22
Causes
Access data lost
Incorrect login credentials
Customer firewall blocks interfaces
Instrument is outside the range of the gateway
Faulty commissioning or improper, unsuitable
installation location
WIKA operating instructions, models PEW-1000 and PEW-1200
Measures
Contact customer service
Check using the supplied login credentials
Contact the person responsible for infrastructure
Observe instructions in accordance with the
operating instructions.
Observe instructions in accordance with the
operating instructions.
Publicidad
