Kuzar HAMMER 40 Manual De Instrucciones página 4

Industrial Lifter HAMMER 40
3.7 - If there is a possibility of strong winds or gusts, place the lift on the
ground firmly and secure it with the use of straps. NEVER attach a strap
to a vehicle or any other object that can possibly be moved.
3.8 - NEVER move the lift whilst it is carrying a load and elevated over
2.5m. It is not advisable to carry out any type of horizontal movement
even small positional adjustments. You can only move the lifter when is
load at minimum height.
3.9 - NEVER allow any team member below the load or anybody else in
the lifts operating zone.
3.10 - Be careful with all obstacles above the lift and its extension zone
such as cornices, balconies, and luminous signboards. It is very impor-
tant to avoid the presence of all types of cables below the extended lift.
3.11 - Do not use stepladders on the lift or use it as a support for them.
3.12 - Before using the lift, check the condition of the cable. The cable
should not have broken threads or show any signs of crushed/flattened
areas. NEVER use faulty cables, always change them if there is any
doubt. Only use KUZAR steel cables; reference: DIN 3060.
Quality: 180KG/mm and torsion resistant.
Manual in ENGLISH
KUZAR SYSTEMS S.L. 4