Hilti POS 15 Manual De Instrucciones página 52

Showing the recalculated station height after measurement
The recalculated station height is shown after taking the angle and distance measurements and it can then be
confirmed or canceled.
Set station
NOTE
When the "Heights" option is active, a height must be assigned to the station, i.e. a height value for the station must
exist.
NOTE
The station is always saved in the system's internal memory. If the station name already exists in memory, the station
must be renamed. i.e. a new name assigned to it.
Cancel and return to previous
screen.
Measure angle and distance.
Continue, showing the
(re)calculated station height.
Cancel and return to previous
screen.
Confirm station height. Continue
with setting station.
Return to orientation measure-
ment.
Enter station height or height
mark manually or, respectively,
select a previously saved height
point with measurement of ver-
tical angle and distance.
Show station data.
Setting the station.
en
47