To stop the sound: touch
The function has no effect on the
operation of the cooking zones.
5.8 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, all other
symbols on the control panels are locked.
The function does not stop the timer
functions.
Touch
to activate the function.
comes on. The heat setting is lowered to
1.
To deactivate the function, touch
previous heat setting comes on.
5.9 Lock
You can lock the control panel while cooking
zones operate. It prevents an accidental
change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays on.
To deactivate the function: touch
previous heat setting comes on.
When you deactivate the hob,
you also deactivate this function.
5.10 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the hob
with
. Do not set any heat setting. Touch
for 4 seconds.
the hob with
.
To deactivate the function: activate the hob
with
. Do not set any heat setting. Touch
for 4 seconds.
the hob with
.
12
ENGLISH
.
. The
.
. The
comes on. Deactivate
comes on. Deactivate
To override the function for only one
cooking time: activate the hob with
comes on. Touch
heat setting in 10 seconds. You can
operate the hob. When you deactivate the
hob with
the function operates again.
5.11 OffSound Control
(Deactivating and activating the
sounds)
Deactivate the hob. Touch
The display comes on and goes out. Touch
for 3 seconds.
of the timer to choose one of the
following:
•
- the sounds are off
•
- the sounds are on
To confirm your selection wait until the hob
deactivates automatically.
When the function is set to
the sounds only when:
• you touch
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control panel.
5.12 Power limitation
The hob is set to its highest possible power
level by default.
To decrease or increase the power level:
1. Deactivate the hob.
2. Press and hold
display comes on and goes off.
3. Press and hold
appears.
4. Press
. P46 appears.
5. Press
/
of the timer to set the
power level.
Power levels
Refer to "Technical data" chapter.
.
for 4 seconds. Set the
for 3 seconds.
or
comes on. Touch
you can hear
for 3 seconds. The
for 3 seconds.
or