Brandt BPI1641PB Manual De Instrucciones página 28

USE USE
CHOICE OF COOKWARE
Most cookware is compatible with induction. Only
glass, earthenware, aluminium without a special
bottom, copper and some non-magnetic stainless
steel do not work with induction cooking.
Tips
We suggest that you choose cookware with
a thick and flat bottom. The heat will be dis-
tributed better and cooking will be more uniform.
Advice on how to save energy
Cooking with the correctly sized lid saves energy.
If you use a glass lid, you can control
BURNER SELECTION
Select the burner which is the right size for the
bottom of your cookware (see table). If the base
or the cookware is too small, the power indicator
will start to flash and the burner will not work,
even if the cookware's material is recommended
for induction.
Do not use containers with a smaller diameter
than that of the fireplace (see table).
Diameter of
burner (cm)
16
18
21
Horizone
Tips
When using the two hobs simultaneously, the
hob manages the power distribution so as not to
exceed the total power of the hob.
When using the maximum power (Ultra Boost)
on several hobs at the same time, make sure
that you use the best position for your containers
according to the model of your hob as shown in
the illustrations.
10
Maximum Diameter of
power of burner
bottom of
(Watts)
cookware
2500 10 - 18
3600 11 - 22
3600 12 - 24
4000 18 - Oval
Fishmonger
This will avoid automatic power limitation on one
of the hobs if the positioning is not optimal:
= Recommended positioning
= positioning to be avoided
Ultra Boost Ultra Boost
Ultra Boost Ultra Boost
Power management
The total wattage of your cooktop must match The total wattage of your cooktop must match
the wattage of your electrical installation. the wattage of your electrical installation.
By default, the power level of your cooktop is set By default, the power level of your cooktop is set
at its highest level. at its highest level.
To increase or decrease the power level : To increase or decrease the power level :
- When first turned on (within 30 seconds) press - When first turned on (within 30 seconds) press
any key, the maximum power level is displayed. any key, the maximum power level is displayed.
To decrease the power, press the - key until the To decrease the power, press the - key until the
desired power is reached. desired power is reached.
EN