WOOD'S AC Milan Silent 7K WIFI Smart Home Manual De Instrucciones página 16

Operating Instructions
GB
PROBLEM CAUSE
The unit does not
Not plugged in / Plug or socket is damaged.
start when pressing
on/off
A fuse is blown or broken.
button
The room temperature is lower than the set temperature.
(Cooling mode)
Not cool enough
The doors or windows are not closed.
There are heat sources inside the room.
The exhaust air hose is not connected or blocked.
Temperature setting is too high.
The air inlet is blocked.
High noise level
The ground is not level or not flat enough.
The sound comes from the flowing of the refrigerant inside the
air conditioner
If you are having trouble with your portable air conditioner, please refer to troubleshooting section below. If
nothing of the below works, please contact your retailer for servicing of your Air Conditioner.
Error Codes CAUSE
E2 Code
Room temperature sensor failed or is damaged.
E3 Code
Evaporator temperature sensor failed.
E4 Code
Water tank full.
16
REMEDY
Plug in or replace the power or socket.
Replace the fuse (3.15A/250AC).
Reset the temperature.
Make sure all the windows and doors are closed.
Remove the heat sources if possible.
Connect or clean the exhaust air hose.
Reset the temperature.
Clean the air inlet.
Place the unit on flat, level ground if possible
It is normal.
REMEDY
Replace room temperature sensor.
Replace evaporator temperature sensor.
Please empty the water tank.