Register Your Product; Instructions For The End User; General Use Information; User Servicing Instructions - Stiebel Eltron ULTRONIC 1 S Guía De Operación E Instalación

GENERAL INFORMATION

REGISTER YOUR PRODUCT

3. Register your product
You must register this product within 90
days of purchase on our website in order to
activate the standard warranty or to be eligible for
the extended warranty. Go to our web site at:
www.stiebel-eltron-usa.com and click on register
your product.
Before beginning the registration process, we
suggest that you gather the necessary information
which will be as follows:
Type, Example: Ultronic 1 S (from the black label that
is on the bottom of the unit)
Number listed after "Nr."
Place of Purchase
Purchase Date
First & Last Name
Email address
Physical Address
Phone Number
IF YOU HAVE ANY QUESTIONS CONCERNING THE
REGISTRATION PROCESS OR WARRANTY OPTIONS,
PLEASE CONTACT STIEBEL ELTRON USA DIRECTLY AT
(800)-582-8423.
Limited liability warranty:
Stiebel Eltron, Inc. is not liable for damages to the unit,
damage to personal property, bodily injury, or loss of
life due to the following conditions:
- Non-observance of these instructions
- Incorrect use
- Installation of the appliance by unqualifi ed personnel
- Unauthorized modifi cations
- Technical modifi cations
- Use of unauthorized spare parts
WWW.STIEBEL-ELTRON-USA.COM
OPERATION

INSTRUCTIONS FOR THE END USER

4. Instructions for the end user

4.1 General use information

In order to dry your hands most effi ciently, please use
the following procedure:
Shake off excess water over the wash basin 
Place hands underneath the unit at a distance of 
4˝ - 7˝
Rub your hands together as if you were washing 
them
Your hands will be dry in approximately 15 seconds.
The Stiebel Eltron Ultronic series hand dryers are
equipped with an infrared sensor switch. This sensor
will activate the unit when hands are placed underneath
it. Approximately 7 seconds after the hands have been
removed, the unit will automatically shut off.
The sensor is the black rectangle located underneath the
unit between the air exit and air inlet grills. The sensor
switch will not work properly if it has been covered by
gum or dirt. If the sensor is obstructed, the hand dryer
will switch off automatically to prevent it from running
continuously.

4.2 User servicing instructions

The Ultronic hand dryer does not contain any
!
parts serviceable by the lay person. In case of
malfunction please contact a licensed electrician.
CAUTION Fire
Never spray cleaning spray into the air slot.
Ensure that no moisture can enter the appliance.
To clean the housing use a soft cloth with a mild
detergent if necessary. Never use any abrasive cleaners
since they will scratch the fi nish of the unit. Never spray
water or cleaning fl uids directly on hand dryer. While
cleaning the unit, make sure the electric eye switch is
not covered.
ULTRONIC ™ 1 / ULTRONIC ™ 2 TOUCHLESS AUTOMATIC HAND DRYERS | 5