TONOR K6 Manual página 8

Turn ON/OFF the speaker
1. The speaker can work with DC power by build in battery (DC
mode).
2. DC mode, the speaker will be powered by the built in recharge-
able battery.
Use the power adaptor to power on the speaker and set the power
switch on rear panel to ON position.
Caution:
If you do not use this unit for a while, please switch the "POWER"
button to "OFF" status, and disconnect the AC power cable of this
unit.
Charging the internal Battery
The speaker comes with a built-in rechargeable battery,follow the
below steps to charge it:
1. Connect the adapter cable and plug to the wall socket on the rear
panel.
2. There is a BATTERY indicator light on the rear panel will light up
as RED color, the battery is being charge.
When the BATTERY indicator RED color light of, the battery is fully
charged, then unplug the adapter cable to stop charging.
Internal Battery Level indicator
1. There is a battery level indicator on the display, total are three
level of the battery, it will decrease the level when the battery is
running.
2. When you see there is only 1 level of the battery indicator, please
charge the internal battery on time to keep the battery life.
3. When the speaker sound becomes abnormal, please charge the
internal battery on time to keep the battery life.
Note: please fully charge the product when it is not going to be used
for a long time and charge once a month to keep longer battery life.
07