Recommended List Of Spare Parts To Be Kept In Store; Technical Specifications - Grillo CLIMBER 7.13 Manual De Instrucciones

Climber Series 7/ Translation of the original instructions

RECOMMENDED LIST OF SPARE PARTS TO BE KEPT IN STORE

2 x mowing blades
2 x blade screws
2 x blade screw nuts
1 x set of belts
1 x air filter for engine
1 x oil filter for engine
1 x throttle cable
2 x wiring system fuses

TECHNICAL SPECIFICATIONS

ENGINE: CL7.13 – B&S VANGUARD 13 HP 344 cc OHV, single-cylinder, internal combustion, 4-
stroke, AVS synchro-balanced series.
CL7.18 – B&S VANGUARD 7180 INTEK OHV 15,2 HP 656 cc, twin-cylinder, internal combustion, 4-
stroke series.
STARTING SYSTEM: electric with battery 12V.
GEARBOX: hydrostatic transmission.
DIFFERENTIAL: with locking device.
CLUTCH: for PTO with electromagnetic clutch.
GROUND SPEED: continuously variable from 0 to 10 km/h + reverse speed from 0 to 6 km/h.
TYRES: front: 13×5.00-6; rear: 16x 6.50-8.
BRAKE: front emergency brake; rear parking brake.
OPERATOR SEAT: sprung and adjustable, equipped with roll bar.
CUTTING DECK: side/rear discharge.
CUTTING SYSTEM: single rotating blade.
CUTTING WIDTH: 850 mm
BLADE SPEED: 76 m/sec
CUTTING HEIGTH: from 35 mm (±1.3'') to 85 mm (±3.3'') with 6 different cutting positions and 1
travel position.
WORK CAPACITY: 5000 m 2 /h (indicative) – CL7.13; 6.000 m2/h (indicative) – CL7.18.
STEERING RADIUS: 450 mm.
FUEL TANK: 7 litres RESERVE: 1 litres
STANDARD FEATURE: tow bar, front headlight.
SIZES: W956xL1895xH980mm.
WEIGHT:  225 kg – CL7.13 /  245 kg – CL7.18
8