Publicidad
Idiomas disponibles
Idiomas disponibles
362Wb Centennial Table — Parts List
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and model number.
Part
Description
Ab
Top Assembly
Bb
Pedestal Assembly
Db
Foot
E
#10 x 2-1/2" Flat Head Screw (inserted)
F
3/8" x 3-1/2" Hanger Bolt (inserted)
G
Curved Washer
H
3/8" Hex Nut
I
Small Adjustable Glide (installed)
J
#10 x 1-1/2" Pan Head Screw
K
#10 x 1" Oval Head Screw (inserted)
L
Assembled Leaf Support (attached)
M
Hinge (attached)
N
#10 x 3/4" Pan Head Screw (inserted)
R
3/8" x 1-1/2" Dowel (inserted)
S
Insert Nut (inserted)
SPECIAL INSTRUCTIONS:
If a top or leaf panel should become cupped, do not be alarmed. The panel was flat
when it was manufactured. It is a natural characteristic of wood in an unfinished
state to cup from uneven moisture conditions. The figure at the right shows
an exaggerated view of what could happen. This only means that the
convex side has absorbed moisture, or the concave side has
dried out. Usually a cupped panel will equalize and straighten
out if both sides are exposed to similar conditions for a day or so.
362Wb — Page 2 — 10/13
Quantity
1
1
4
4
4
4
4
4
6
24
2
4
8
4
4
Publicidad
