Publicidad
Idiomas disponibles
Idiomas disponibles
1. Remove belt guard.
2. Loosen the 4 engine plate bolts.
3. Move the motor with the horizontal adjustment bolts until you have the correct
tension as shown below.
4. Retighten engine bolt s.
5. Replace belt guard.
Belt replacement
1. To replace the belt, follow the above belt adjustment directions.
2. After you have loosened the engine bolts, remove the old belts and replace it with
new belts. Always replace both belts as they come in a matched set. This is required
for proper operation.
3. Set belt tension and alignment per above instructions.
NOTE: Check and re-tighten belts after initial break-in period, one hour of use.
Centrifugal clutch tech tips
The shoes and springs on the clutch are normal wear items. If you notice decreased
performance of the clutch, they should be checked and replaced if necessary.
The clutch on your machine is designed for rugged, dependable service, however, it is
important to understand the limitations of a clutch. A clutch is designed to provide
load free starting of the engine, and slippage under excessive overloading of the
Publicidad
