Technical Data
Motor Cylinders
Motor Rated Power
Gas Tank Capacity
Fuel Yield at 100% Fill Up
Inlet and Outlet Diameters
Maximum Suction Depth
Maximum Height
Thermal Energy Consumption
Fuel Specifications
• EThe equipment has an air-cooled 4-stroke motor using
pure unleaded gasoline.
• For no reason at all mix oil with the fuel.
• For no reason at all use fuel mixed
WARNING
with ethyl alcohol (gasohol), ethanol or methane. These
attract humidity causing separation and acid build up
when stored. Acidity can damage the motor fuel system
when stored.
• To avoid having problems with the motor, please drain
the fuel system before storing the equipment 30 days or
longer. Drain the gasoline tank, start the motor and leave
it running until the fuel lines are empty. Next season, use
fresh gasoline.
Code
Description
Motor Type
No Load Speed
Fuel
Oil Type
Maximum Flow
Noise Level
Weight
MOTB-2
28029
Water Pump
212 cc
6.5 Hp
4-stroke OHV
3 650 RPM - 3 700 RPM
Gasoline
0.8 gal
1.66 hours
SAE 10W/30
2"
16.4 feet
82 feet
132 gal/min
Lower than 81 dB at 13'
1.39 L/h
44 lb
• Never use inside the gasoline tank products to clean motors
or carburetors. Those products can cause permanent
damage to the Motor.
Do not use the equipment in closed areas.
DANGER
Prevent breathing accumulated carbon
monoxide, an odorless, toxic and potentially fatal gas.
Never smoke near fuel.
DANGER
Do not smoke near the filling-up
area or while operating the equipment.
3
ENGLISH