Publicidad
Idiomas disponibles
Idiomas disponibles
EN
•
If the steam button is pressed before the boiler has reached the optimum tempera-
ture, then water instead of steam could come out of the nozzle.
•
Never touch hot surfaces while using the product. Leave attachments to cool
before replacing them.
•
Even when the appliance is not in operation, unplug it from the power mains
and leave it to cool before inserting or removing single parts or before
cleaning it.
•
IMPORTANT: danger of scalds.
NEVER OPEN THE CAP ON THE BOILER TANK DURING USE.
IMPORTANT: Before unscrewing the cap on the boiler tank, proceed as follows:
ü switch off the appliance at the main switch and
unplug the power cord from the mains socket;
ü bleed out the remaining pressure from the boiler tank, using the steam
button on the gun and pointing the jet into a suitable container;
ü leave the appliance to cool for a few minutes;
ü slowly loosen the boiler tank cap, part of the way and wait for a few sec-
onds;
ü unscrew the cap completely and remove it.
•
Before using the product, make sure that all items, surfaces and fabrics to be cleaned
are resistant to or compatible with the high temperature of the steam. Specifically,
treated terracotta flooring, wooden surfaces or delicate fabrics, such as silk or velvet,
should not be treated without first consulting the instructions from the manufacturer
and carrying out a test on a small hidden sample part.
•
Never use in swimming pools containing water.
•
Never add scale removers, fragrances, alcohols or detergents to the boiler tank, as
these could damage the appliance. We recommend filling with tap water or alterna-
tively, with 50% demineralised water and 50% tap water in areas where the water
is very hard.
•
Before switching on the appliance, make sure that there is sufficient water inside
the boiler tank. If it is necessary to refill the tank during use, proceed as described
previously, and following the instructions in the paragraph "FILLING THE BOILER
WARNING danger of scalds
IMPORTANT possible damage to materials
- 12 -
Publicidad
