De Dietrich LK6GVX1A Guía De Utilización página 32

2
INSTALLATION
Important
If your hob is located above your oven, the hob's thermal safety devices can impede the simultaneous
use of the hob and the oven's pyrolysis programme, display code "F7" in the control zones. In such cir-
cumstances we recommend that you increase the hob's ventilation by creating an opening in the side of
the cabinet (8 x 5 cm).
2.3 Electric connections
These hobs must be connected to the power grid via
an all-pole cut-off device that complies with installation
regulations in effect. A disconnection device must
be incorporated into the fixed wiring.
Identify the type of cable of your hob according to
the number of wires and colours.
When switching your hob on or after a lengthy power
cut, a code is shown on the control pad (this display
is reserved for your after-sales service, where ap-
plicable. The user of the hob does not need to take
notice of it).
This information disappears after around
30 seconds.
11