Home Decorators Collection 899-246 Manual De Instrucciones página 5

INSTALATION & ASSEMBLY:
1. Shut off power at the fuse box or circuit breaker box. Remove the
old fixture, including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the parts on a
clear surface. Take care not to lose any small parts necessary for
installation.
3. Thread the Fixture Mounting Screws into the provided holes on the
swivel of the Mounting Bracket. Thread the Hex Nuts onto the
Fixture Mounting Screws. Do not tighten the Hex Nuts at this time.
Loosen the Swivel Screw on the Mounting Bracket.
4. Pull the power Supply Wires out from the Outlet Box. Attach the
Mounting Bracket to the Outlet Box using the Bracket Mounting
Screws. Turn the swivel on the Mounting Bracket to align it
horizontally. Tighten the swivel screw (Fig. 1).
5. Strip approximately ¼" of insulation from each supply and fixture
wire.
Mounting Bracket
Turn Swivel
Hex Nut
Fixture Mounting Screw
Bracket Mounting Screw
Power Supply Wires
Fig. 1
Wall
Outlet Box
Page 5