3. Turn the OFF/ON selector (external dial marked grey color in the image
below) to the "ON" position.
4. Open the access cover in order to operate the manual choke (image
below).
Turn
5. Smoothly, grab the handle and pull the starter rope (recoil starter) until the
final to calculate the maximum stroke of the rope (and not exceed it after
when you pull energetically). After let the rope recoils and then pull the rope
energetically to start the engine.
6. After the engine has started, turn the choke lever fully to the left.
NOTE: If the rope recoils abruptly, the spring or the rope itself may be
damaged. This is not covered by the warranty.
NOTE: After pulling, do not release wilfully the handle to avoid hitting the
machine. Control the handle tightly until it is fully recoiled.
NOTE: Never pull the starter rope while the generator is running.
it
to
the
right
53
for
a
cold
start.