Urmet elekta steel 1060/23 Manual De Usuario página 25

1 2
Once the or key has been pressed, the message PLEASE ENTER appears.
11 AUTO-ON
From the apartment station or the switchboard it is possible to activate the door unit camera (if the system
has been suitably confi gured). The auto-on mode is described in detail in the Ipercom technical manual
(chapter on system confi guration).
With simple auto-on, the camera LEDs are not turned on. The LEDs light up when the button to start an
audio-video conversation is pressed on the apartment station: It is possible to open both doors in both
modes.
12 HOW TO USE THE CALL MODULE SPECIAL CODES
X
Press the keys and
appear requesting that the special code be entered for the activation of the
actuator relay if appropriately confi gured in the system.
13 MAINTENANCE
Clean the display and the protection over the camera with a slightly damp cloth.
Do not use abrasive products, solvents or soapy solutions.
DS1060-169
0
(on the keypad) quickly in sequence. A screen will
25