Publicidad
Idiomas disponibles
Idiomas disponibles
Pre-Installation
PLANNING INSTALLATION
You may choose to install this sink either below the counter (undermount) or above the counter (topmount) . You
must install this sink in a counter at least 36 in . (914 mm) wide with a solid surface that has a minimum thickness
of 3/4 in . (19 mm) .
Protect the entire surface of the product during installation to prevent damage .
TOOLS/MATERIALS REQUIRED
Measuring tape
Saber-saw or
Jig-saw
Silicone sealant
Flathead
screwdriver
Safety gloves
PARTS REQUIRED (NOT INLCUDED)
NOTE:
Parts not shown to actual size.
QK33R
Carpenter's square
Electric drill
Pencil
Hacksaw
Tail pipe (2)
4
UNDERMOUNT
Supply lines (2)
TOPMOUNT
Wrenches (2)
Pipe wrench
Thread Seal
Safety goggles
Publicidad
