5.17
Long term shut-down
For seasonal shut-downs or holidays proceed as follows:
- Disable the device.
- Set the main system switch to Off.
5.18
Error signals
Error
Room temperature probe failure (located inside the thermostat).
Failure or connection of a double remote room probe on one of the two connected cooler-
radiators.
5.19
Electronic control board
The electronic board allows the control of all functions
from the wall-mounted EKWHCTRL1 control panel.
You can connect to and remote command up to 30
convectors that will be controlled in broadcast mode (with
simultaneous commands to all convectors).
The board has a green LED indicating the status and any
faults.
The main operating parameters,
room temperature are transmitted from the wall-mounted
EN
5.20
LED Signals (ref. A)
Green Led: Signals the functioning of the
device. Flashes in case of faults.
34
the setpoint and the
N540022B
The anti-freeze function is not on.
remote control panel to all connected terminals in the
network, ensuring smooth operation.
A
LED off: device stopped or not powered.
Display
E1
E2