Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
GB
Thank you for choosing an Electrolux Ergorapido® Classic vacuum cleaner.
In order to ensure the best results, always use original Electrolux accessories
FR
and spare parts. They have been designed especially for your vacuum
cleaner. This product is designed with the environment in mind. All plastic
parts are marked for recycling purposes.
AR
DESCRIPTION OF ERGORAPIDO® CLASSIC
A. ON/OFF button
BG
B. Power regulation button
C. ON/OFF button, hand unit
D. Locking screw
CZ
E. Release button, hand unit
F. Wallholder
G. Charging cable (with adapter)
DE
H. Charging plug
I. Fine filter (inner filter)
DK
J. Pre filter (outer filter)
K. Release button, dust container
L. Dust container
EE
BEFORE STARTING
Check that the package includes all parts described in this instruction
ES
manual and read this manual carefully. Pay special attention to the safety
precautions chapter. Save these instructions.
FI
1
Assemble the handle.
2
A) Make sure that Ergorapido® Classic is on a stable and horizontal sur-
GR
face away from heat sources, direct sunlight or wet places. Attach the
wall holder to the wall 104 cm above the floor with a suitable screw and
wall plug. Make sure to use a correct wall plug for the wall. B) Attach the
HR
handle to the wall holder. C) Connect the charging cable to the back
side of the vacuum cleaner.
3
HU
Insert the adaptor into the mains and charge Ergorapido® Classic. The
charging indicator will be lit when Ergorapido® Classic is on charge.
IT
CHARGING ERGORAPIDO® CLASSIC
4
When fully charged, the charging indicator will blink slowly. The num-
bers of LED lamps will indicate the level of charge. Full charging time is
LT
around 4 hours. For better battery performance, charge ERGORAPIDO®
Classic for 24 hours before first use and always keep it on charge when
LV
not used.
VACUUMING WITH ERGORAPIDO® CLASSIC
NL
Before vacuuming, check that the nozzle wheels and the brush roll are
clean from sharp objects in order to avoid scratching sensitive floors
and to ensure full cleaning performance.
NO
5
Start and stop Ergorapido ® Classic by pushing the ON/OFF button.
Ergorapido ® Classic will start on the high power mode.
PL
For more silent cleaning and longer runtime, press the power regula-
tion button.
PT
VACUUMING FURNITURE, CAR SEATS ETC.
6
Press the button to release the hand unit from the main body.
RO
7
Attach the crevice nozzle to facilitate cleaning of areas difficult to reach.
Attach the brush on the crevice nozzle for dusting.
RU
8
The crevice nozzle and small brush can be stored in the slot on the back
side of the handle.
SE
EMPTYING OF THE DUST CONTAINER
9
Remove the dust container by pressing the buttons.
SK
10
Take out the filters from the dust container by pressing the release but-
tons. Empty the contents into a dustbin. Never wash the dust container
or filters in a dishwasher.
SL
IMPORTANT - FILTER CLEANING!
SR
11
Pull the filter cleaning rod to its end position and release it to remove
dust from the inner filter. Repeat 5 times.
12
The filters must be cleaned at regular intervals to ensure a high clean-
TR
ing performance. Take out the filters by pressing the release buttons.
Separate the inner filter from the outer filter.
UA
13
Rinse the filter parts carefully under lukewarm water without using any
detergents. (Never use the dishwasher or washing machine.) S hake to
www.electrolux.com
Nova_Classic_Electrolux_2017-12-20.indd 4
M. Dusting brush
N. Crevice nozzle
O. Cable protector grill
P. Hatch cover for brush roll
Q. Brush roll
R. Charging indicator
S. Cliff hanger
T. Slot for accessory storage
remove excess water and leave to dry minimum 12h before putting
them back into the cleaner.
CLEANING THE HOSE AND NOZZLE WHEELS
14
Loosen the hose behind the nozzle from its upper connection. Remove
any object or debris that can be blocking the airflow in the hose or in
the air channel to the dust cup, and put the hose back.
15
If the wheels need to be cleaned or get jammed, remove them carefully
by using a flat screwdriver.
REMOVING AND CLEANING THE BRUSH ROLL
16
If the brushroll gets blocked E rgorapido ® Classic will stop. Open the
cable protector grill and the brush roll hatch cover and remove the
brush roll.
17
Use a pair of scissors to remove threads etc. Reassemble the brush roll,
making sure it can spin freely.
REMOVING THE BATTERIES FOR RECYCLING
Warning; Battery removal must only be done by an Electrolux
service center or official collection point!
18
Only remove batteries if the product is to be scrapped. Improper
handling of the batteries may be hazardous. Batteries should always
be completely discharged before removal. Take your product to an
Electrolux service center or official collection point for recycling. They
can remove and recycle the battery and electric parts in a safe and pro-
fessional way. Follow your country's rules for collection of rechargeable
batteries and electrical products.
Enjoy a great cleaning experience with Ergorapido® Classic!
4
2017-12-20 08:10:55
Publicidad
