Sauder Steel River Serie Instrucciones De Montaje página 8

Step 2
å
Fasten the ENDS (B and C) to the END FRAMES (X and Y).
Use six 1/2" PAN HEAD SCREWS (22) through the BRACKETS
on the ENDS and into the END FRAMES.
å
Fasten the END FRAMES (X and Y) to the ENDS (B and C).
Use four 2" PAN HEAD SCREWS (16).
å
NOTE: You should start each SCREW a few turns before
completely tightening any of them.
1/2" PAN HEAD SCREW
(6 used for the BRACKETS)
2" PAN HEAD SCREW
(4 used for the ENDS)
Page 8
22
B
X
16
www.sauder.com/service
The post closest to the
edge must be here.
The post closest to the
edge must be here.
C
Remember:
Righty tighty.
Lefty loosey.
Y
427549