Publicidad
Idiomas disponibles
Idiomas disponibles
To stop the fan, just press the button "OFF" on remote or " " on control
panel.
4. If you want to increase the blast area in your room, press 'Swing button"
on remote, and the fan will oscillate and blast your room in large scope. To
stop oscillating, just press it again. Moving the fan head either up or down
will change the direction of the wind.
5. Remove the plug from the socket-outlet to completely shut the fan off.
Cleaning / Maintenance Instructions
To safely take care of your fan, please remember to follow these
instructions below:
1. Always remove the plug from the socket-outlet, and allow the fan to stop
completely before cleaning the fan.
2. Do not allow water to drip on, or enter into the fan housing.
3. Always use a soft cloth, moistened with a mild soap solution.
4. Do not use any of the following agents as a cleaner: Gasoline, Thinners,
or Benzene.
5. In case of malfunction or doubt, do not try to repair the fan yourself, it
may result in a fire hazard or electric shock.
FAN Cleaning
Clean the fan grill, housing and base with a soft damp cloth. Do not attempt
to remove the fan blades. Please use caution around the motor housing
area. Do not allow the motor, or other electrical components to be exposed
to water.
Publicidad
