Sauder Portage Park Serie Instrucciones De Montaje página 20

Step 15
å
You have the option to fasten your Hutch to the 427478 Desk Top or the 427478 Return. To fasten your Hutch to the
Return, go to the next step now.
å
First, place the hutch on the 427478 top using the measurements provided in the enlarged diagram. Then mark the
holes in the FRAMES (K) with your pencil.
å
NOTE: Be sure to use the exact spacing for both ends of the FRAME (K) on the 427478 Top as shown in the
enlarged diagram.
å
Next, remove the hutch from the 427478 Top. Then drill a 1/8" hole in the four marked locations of
your 427478 top.
å
Now, fasten the FRAMES (K) to the 427478 large top. Use four 2" PAN HEAD SCREWS (10).
2" PAN HEAD SCREW
(4 used in this step)
Pencil
Electric drill with 1/8" bit
Page 20
10
www.sauder.com/service
K
5/8" 5/8"
1-1/8" 1-1/8"
10
K
426281