Descargar Imprimir esta página

Zanussi ZNFN18ES3 Manual De Instrucciones página 16

Frigorífico-congelador

Publicidad

Idiomas disponibles

Idiomas disponibles

Problem
Some specific surfaces inside
the fridge compartment are
warmer at some times.
Temperature setting LEDs flash
at the same time.
If the advice does not lead to the
desired result, call the nearest
Authorized Service Centre.
REPLACING THE LAMP
The appliance is equipped with a longlife LED
interior light.
Only service is allowed to replace the lighting
device. Contact your Authorised Service Centre.
16
Possible cause
An error has occurred in meas-
uring the temperature.
CLOSING THE DOOR
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
installation instructions.
3. If necessary, replace the defective door
gaskets. Contact the Authorised Service
Centre.
Solution
This is a normal state.
Contact the nearest Author-
ised Service Centre. The cool-
ing system will continue to
keep food products cold, but
temperature adjustment will
not be possible.

Publicidad

loading

Este manual también es adecuado para:

Znfe18es3925 503 360