Descargar Imprimir esta página

LaCimbali M26 Uso E Instalacion página 54

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 155
7. Caution
Danger of burns
The areas marked with this sign become
hot. Great care should be taken when
in the vicinity of these areas.
GENERAL
The manufacturer disclaims all liability for
damages to items or persons due to improper
for purposes other than its intended use.
or bare feet.
Ensure that the appliance is not used by children
or persons who have not been instructed in its
correct use.
Danger of Burns
Do not place the hands or other parts of the body
the steam and hot-water nozzles.
Cup-warmer tray
the cup-warmer tray.
Ensure that the coffee cups are completely
drained before placing them on the cup-warmer
8. Maintenance and Repairs
the service centre.
the machine and request a replacement from the
service centre.
To ensure safety during operation, it
is absolutely necessary to:
follow all the manufacturer's instructions;
periodically check that all safety devices
are intact and functioning properly (the
purchase and every year after that).
02_M26_UNICO_EU_2314.indd 8
02_M26_UNICO_EU_2314.indd 8
WARNING: Hot surface
ACHTUNG:
ATTENTION: Surface chaude
ATTENZIONE:
tray.
No other objects shall be placed on the cup-
warmer tray.
MACHINE CLOSE-DOWN
When the machine is left unattended
for a prolonged period (for example
out of hours), carry out the following steps:
Clean as indicated in the dedicated
chapter;
on switch;
Close the water tap.
N O T E : f o r m a c h i n e s w h i c h c a n
be programmed to switch on and off
automatically, the power must be left on
only if this function is active.
Non-compliance with these safety measures
exonerates the manufacturer from all liability
for malfunctions, damage to property and/
or injury to persons and/or animals.
WARNING
can jeopardize the safety and conformity
of the machine.
repairs.
WARNING
Only use original spare parts guaranteed by
the manufacturer.
If original spare parts are not used, the
manufacturer's warranty will no longer be
valid.
WARNING
After maintenance, perform the installation
of the user's manual.
8 EN
07/04/2023 12:04:55
07/04/2023 12:04:55

Publicidad

loading