Descargar Imprimir esta página

LaCimbali M26 Uso E Instalacion página 66

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 155
Procedure to follow at the end of the working day on all groups or when signalled by the machine.
COFFEE CIRCUIT CLEANING CYCLES
circuit.
NOTE: the following operations must be carried out when the machine is on and pressurized.
Groups of DT version with display
COFFEE CIRCUIT
ATTENTION, RISK OF SCALDING: During the wash
cycles, hot water and steam will exit from the groups.
If the machine sends the warning message, "EXECUTE
COFFEE WASHING" will appear on the display.
This request will continue to appear for one hour or until
the wash cycle is performed.
• •
simultaneous
simultaneous: all groups are washed at the same time.
• •
sequential: each group is washed separately and in
sequential
sequence. It is therefore possible to continue using the
Note: The simultaneous washing mode lasts 7 minutes.
dispenser group.
A third type of washing cycle can also be carried out:
• •
single
single
group without having to wash the remaining ones.
Groups not involved in the washing cycle can still be
used during that time.
Note: The single washing cycle cannot be carried out if the
machine launches a warning message.
Note. Once the wash cycle is underway, it CANNOT be
If there is a power failure, when power is returned the
message "EXECUTE WASHING" will be displayed.
Complete the cleaning operations as described pre-
viously.
Note: If no wash-cycle messages appear and the
machine is used frequently, a wash cycle can be
02_M26_UNICO_EU_2314.indd 20
02_M26_UNICO_EU_2314.indd 20
performed at any time:
Press the
key:
Use the
and
keys to position the cursor (black line)
on the desired line, then press the
It is possible to exit the washing selection panel by press-
ing the key
.
The wash cycles performed without request by the
switching back on the machine.
Programmed wash cycles that are not carried out will be
memorized by the machine.
NOTES. The technical personnel has the ability to enable
or disable the "block" function.
With "block" enabled, if the washing cycle is not performed
within an hour, the machine prevents beverages from being
dispensed.
To perform the washing cycles, follow the steps on the
next pages.
20 EN
CUSTOMER PROG.
KEY MENU
SELF-LEARNING
WASHING
DATA MENU
CUSTOMER
key.
t o
c h a n g e
s e l .
t o
c o n f i r m
07/04/2023 12:05:11
07/04/2023 12:05:11

Publicidad

loading