LaCimbali M26 Uso E Instalacion página 77

21. Clock adjustment
Use the and keys to adjust the clock.
The time increases (or decreases) one minute each time
the key is pressed.
If one of the keys ( or
more than 10 seconds, the minutes setting stops and the
hours setting increases (or decreases).
During the time setting phase, the seconds remain at "00".
22. How to access the programming mode
N.B. ONLY if the item "Customer Progr." is set on
"YES" and the item "Program. block" is set on
"NO".
To access programming press the
message will appear on the display:
CUSTOMER PROG.
KEY MENU
SELF-LEARNING
WASHING
DATA MENU
CUSTOMER
Use the and keys to position the cursor (black line)
on the desired line, then press the
Always use the and
this point there are two possibilities:
2) exit the menu and leave the settings unchanged by
pressing the key.
02_M26_UNICO_EU_2314.indd 31 02_M26_UNICO_EU_2314.indd 31
) is pressed and held down for
key.
key
20 September
wednesday
Note: When modifying data, the cursor changes to "
", or a slide bar with maximum and minimum
settings will appear:
Water dose
0000
-
31 EN
2017
15:18:12
0090
1999
+
07/04/2023 12:05:55 07/04/2023 12:05:55