Hilti VC 5-A22-L Manual De Instrucciones Original página 22

All manuals and user guides at all-guides.com
5 Operation
5.1 Preparations at the workplace
Class L for picking up dust types with exposure limit values > 1 mg/m3
Observe the safety instructions and warnings in this documentation and on the product.
WARNING The appliance may be operated only by authorized, trained personnel.
5.1.1 Use of class L vacuum cleaners
DANGER
Risk of injury. Class L and Class M vacuum cleaners contain dust that is hazardous to the health.
▶ Emptying and maintenance, including disposal of the dust collection container, may be carried out only
by trained and qualified specialists. Wear the appropriate protective equipment.
▶ Before removing the vacuum cleaner from an area contaminated with hazardous substances, use the
vacuum cleaner to clean off its own exterior, wipe it clean or place it in a sealed bag or container. As
all parts of the appliance must be considered to be contaminated, suitable measures to avoid spreading
the dust must be implemented before these parts are removed from the hazardous area.
▶ Never operate the vacuum cleaner without the complete filter system fitted.
5.1.2 Inserting the battery
CAUTION
Electrical hazard. Dirty contacts can cause a short circuit.
▶ Before inserting the battery, make sure that the contacts on the battery and the contacts on the device
are free of foreign matter.
CAUTION
Risk of injury. The battery can drop out if it is not fitted correctly.
▶ Check that the battery is securely seated in the device so that it cannot drop out and possibly injure you
or other persons.
▶ Insert the battery and check that the battery is securely seated in the appliance.
5.1.3 Removing the battery
1. Press both release buttons.
2. Lift the battery up and out of the appliance.
5.1.4 Changing the filter bag
1. Switch the appliance off.
2. Open the two catches.
3. Lift the suction head off the waste material container.
4. Remove the filter bag and remove the holder for the filter bag.
5. Push the holder for the filter bag on to a new filter bag.
6. Secure the holder with the filter bag to the ribs of the waste material container.
7. Set the suction head on the waste material container and close the two catches.
5.1.5 Connecting/disconnecting the suction hose
1. Connect the suction hose to the suction hose intake socket.
◁ The suction hose should be heard to engage.
2. To disconnect the suction hose, press and hold down the EJECT button.
3. Disconnect the suction hose from the suction hose intake socket.
5.2 Types of work
WARNING Use the product for dry applications only.
WARNING The product is for indoor use only.
16 English
Printed: 30.01.2018 | Doc-Nr: PUB / 5397505 / 000 / 00
2
3
4
2202256
*2202256*