Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
BUMPER BAR
WARNING:
bumper bar to lift or carry seat
with child inside. The bumper
bar is not a carrying handle.
WARNING-
FALL HAZARD:
bar is not designed to support a
car seat, stroller may become
unstable.
5)
• Attach the bumper bar by lining up anchors with
the slots on the seat. Push until it locks into place
(Fig. 5a).
NOTE: The bumper bar must be securely attached
before using this product.
• To detach the bumper bar, press the
release button on the bottom of the bar on each
side, and pull bar out of the anchors (Fig. 5b).
7
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Do not use
Fig. 5a
Bumper
Fig. 5b
TO ADJUST SEAT
WARNING:
The upright
position should be used only
for a child that is at least 6
months old.
6)
• Toddler Seat Mode: The seat can be adjusted
into an upright, reclined position.
center button on both sides of the stroller
adaptor to rotate the seat (Fig. 6a).
• Rotate the seat into the desired position until
it clicks into place (Fig. 6b). The seat can face in
either direction, frontward or backward.
• Buckle the strap located underneath the seat
(Fig. 6c).
To tighten the strap, use the hook
and loop method through the clip. Pull the
strap firmly and attach.
NOTE:
To adjust the recline seat strap,
squeeze the adjuster while pulling downwards
or upwards (Fig. 6d).
1
2
Fig. 6c
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ASSEMBLY
Push the
Fig. 6a
Fig. 6b
Fig. 6d
8
Publicidad
