Publicidad
Idiomas disponibles
Idiomas disponibles
Name and function of wired remote controller(Optional)
1
2
3
4
5
6
7
PQWRHDF0 (Heat pump)
PQWRCDF0 (Cooling only)
Operation Mode
Cooling Mode
Auto Mode or Auto Changeover
Dehumidification mode
Heating Mode
Fan Mode
• Cooling Model( ), Heat Pump Model(
1. Plasma button (optional)
Used to start or stop the plasma-purification
function.
2. Jet cool button
Speed cooling operates super high fan speed.
3. Operation mode selection button
Used to select the operation mode.
4. Function setting button
Used to set or clear auto clean or smart clean.
8
5. LCD luminosity button (optional)
9
Used to adjust LCD luminosity
6. Smart clean button (optional)
10
Used to start or stop smart clean.
7. Clear all button
11
Used to clear all timer.
12
8. Room temperature setting button
13
Used to select the room temperature.
14
8. ON/OFF button
Used to turn off/on the unit.
15
10. Indoor fan speed selection button
Used to select fan speed in four steps low,
16
medium, high and chaos.
11. Auto swing button
Used to stop or start louver movement and set the
desired up/down airflow direction.
12. Horizontal airflow direction control button
(optional)
Used to set the desired horizontal airflow direction.
13. Timer and time setting button
Used to set the time of starting or stopping and
sleeping operation.
14. Room temperature checking button
used to check the room temperature.
15. °C/°F switch button
Used to switch temperature reading from celsius to
fahrenheit.
16. Reset button
Used to reset the remote controller.
)
Operating Instructions
Ownerʼs Manual 9
Publicidad
